Data usage is a significant problem for individuals with a limited data plan who do not want to deal with the overage costs. Factors like surcharges, network usage, and more make it necessary for most people to track their use. AT&T has a varied mechanism, and if you’re one of its users, you may see other gadgets connected to the router that you may not recognize. You may wish to remove them to prevent high data consumption. This guide will take you through the Honhaipr device, its effects, and how to check and fix it. So, keep reading to find out.
What Does The Honhaipr Device Mean?
Suppose you have a Honhaipr device connected to the router or Wi-Fi connection, and it uses a large amount of data that may be consuming too much bandwidth on your account. In that case, you’ll have to figure out what is precisely using more data and how to limit its data usage. If you’re experiencing this problem, it’s most likely due to a faulty router or misconfigured settings on the device attached to your router.
Read Also: How Fast is 600 Kbps Internet Speed?
What Does The Honhairp Device Affect?
A device shown as a Honhairp on any network uses too much data or is malfunctioning. Mostly, the Honhairp device tends to use too much data, causing overage on a bandwidth. Depending on your router settings, there may be several gadgets that might generate this name within the linked gadget’s menu on your network.
How to Check For The Honhaipr Device And Fix It?
Here are some of the most common ways to address this issue fast:
1. Note the consumption timings
Most AT&T routers include the modules that enable you to detect when data usage is increasing and the spikes you must handle. Make sure you’re noting them correctly, and then observe their patterns. It will be much simpler for you to discover the device represented as Honhaipr in the network settings.
2. Narrowing down and disconnecting devices
This one is a little old-school, but it’s still worth noting for anybody who isn’t tech-savvy and wants to figure out what’s wrong. The secret is to one by one disconnect each gadget if you’re unable to determine which of the devices is Honhaipr. This can be time-consuming but is the only way to be sure of the specific device causing the problem.
On your PC, keep your connected device’s window open when you’re disconnecting a device from Wi-Fi. Remove one device at a time from your list. You can do this to ensure that the Honhaipr device is not one of your devices, and you can ban it if it isn’t.
3. Check MAC (Media Access Control) Address
MAC is an Internet Protocol address commonly known as an IP address. Every device has its own MAC address, which may be linked to Bluetooth or Wi-Fi for wireless connection or even the internet via Ethernet. The problem is that each device has its unique address. Figuring out the MAC address for the Honhaipr device in your router settings is ideal. You may cross-check it against all of your other devices. The second one is to engage with your inner workings and figure out using data more efficiently. This will aid you in determining where you have excess data usage and how to stop it.
This approach can be used to figure out the Honhaipr device without disconnecting any gadgets from the network. However, the critical thing to bear in mind is that you’ll have to discover how to verify the MAC address on each of your devices. This may be a difficult task for some people. Check the connection between your router and each of your devices for MAC addresses.
4. Check all your devices
Most people report PS4 to be designated as Honhaipr device on AT&T routers, although this isn’t certain and may or may not apply to you. That is why, if you haven’t already, it would be a good idea, to begin with, the PS4 and any other Sony device to save effort and time. Perform a check on all of the devices to fix the issue quickly.
Keeping track of data usage is one of the imperative things to ensure that you aren’t misusing it. But, sometimes, we face the issue of the Honhaipr device on our router, leading to more data usage on the bandwidth. Hopefully, you know how to detect the Honhaipr devices on your router and fix it.